Tata Consulting Engineers Walk-In Drive 2026 in Noida for PMC and Power Engineering Roles

Tata Consulting Engineers Limited is conducting a major walk-in recruitment drive in Noida on Saturday, 1 August and Sunday, 2 August 2026. The interviews will be held from 9:00 AM to 4:00 PM at Green Boulevard, Sector 62, Noida.

The first page of the recruitment notice lists opportunities in the company’s Project Management Consultancy business for professionals with 2 to 25 years of experience. The second page covers design engineering opportunities in the Power Business for candidates with 5 to 20 years of experience across thermal power, transmission and distribution, renewable energy and hydro power.

Tata Consulting Engineers provides engineering services from concept through commissioning, including project management consultancy and asset lifecycle management across power, infrastructure, mining and other industrial sectors.

Tata Consulting Engineers Walk-In Drive 2026: Overview

Tata Consulting Engineers Limited is conducting a walk-in recruitment drive for experienced engineering professionals. The interviews will be held on Saturday, 1 August and Sunday, 2 August 2026, from 9:00 AM to 4:00 PM.

The walk-in interview venue is Green Boulevard, Ground Floor, Towers B and C, Plot No. 89A, Sector 62, Noida – 201301, Uttar Pradesh.

For Project Management Consultancy roles, candidates should have approximately 2 to 25 years of relevant experience. The required qualifications include B.E., B.Tech, Diploma, graduate or postgraduate qualifications, depending on the position.

For Power Business and design engineering roles, applicants should have 5 to 20 years of experience. Eligible qualifications include B.E./B.Tech, M.E./M.Tech in Design Engineering, or a Diploma in Electrical, Mechanical or Civil Engineering for designer positions.

The Power Business vacancies may be based in Noida, Bangalore, Kolkata, Mumbai, Pune or Vadodara. The final work locations for the Project Management Consultancy positions have not been specified in the recruitment notice.

The recruitment advertisement does not mention the total number of vacancies, salary details, application fee, online registration link or a separate last date for registration. Candidates are advised to verify any updated instructions before travelling to the interview venue.

The recruitment advertisement does not specify the total number of vacancies, salary structure, application fee, online registration link, or a last date for registration. Candidates should not assume that an online application is mandatory unless Tata Consulting Engineers issues a separate update.

Industries and Project Sectors

The Project Management Consultancy recruitment covers projects across the following sectors:

• Power: thermal, hydro, transmission lines and substations
• Minerals: ingots, metals, ferrous and non-ferrous industries
• Infrastructure: buildings and tunnels
• Chemicals and manufacturing
• Glass manufacturing
• Solar cell and module manufacturing
• Semiconductor facilities
• Pharmaceutical plants
• Defence projects

PMC Business Job Openings

Construction Manager

Qualification: B.E./B.Tech in Civil, Mechanical, Electrical or Control and Instrumentation Engineering.

Responsibilities: Managing end-to-end construction execution, coordinating contractors, monitoring project progress, budgets and schedules, and ensuring compliance with quality, safety and technical specifications.

Planning Manager or Planning Engineer

Qualification: B.E./B.Tech in Civil or Mechanical Engineering.

Responsibilities: Leading project planning and scheduling activities using Primavera P6 or Microsoft Project, along with project coordination, reporting and analytical responsibilities.

Professionals preparing for this role can review the best Primavera P6 certification courses and practise with these Primavera P6 interview questions and answers. Both resources focus on planning, scheduling, CPM, baselines, earned value management and project controls.

QA/QC Manager

Qualification: B.E./B.Tech in Civil or Mechanical Engineering.

Responsibilities: Establishing and implementing multidisciplinary quality assurance and quality control systems and ensuring compliance with project specifications, applicable standards and regulatory requirements.

MEP Engineer

Qualification: B.E./B.Tech in Mechanical or Electrical Engineering.

Responsibilities: Coordinating and executing mechanical, electrical and plumbing works in accordance with approved drawings, project specifications and construction schedules.

Safety Manager or Safety Engineer

Qualification: B.E./B.Tech or Diploma in Civil, Mechanical or Electrical Engineering with NEBOSH, PDIS or ADIS certification.

Responsibilities: Implementing environmental, health and safety systems, conducting safety inspections and audits, and ensuring statutory and project-level compliance.

The NEBOSH International General Certificate is intended for managers, supervisors and professionals with workplace health and safety responsibilities.

Construction Engineer

Qualification: B.E./B.Tech in Civil, Mechanical, Electrical or Control and Instrumentation Engineering.

Responsibilities: Managing site construction, concreting, reinforcement, piping, equipment erection, structural steel and pre-engineered building works. The role also involves contractor supervision, material coordination and safety compliance.

Quantity Surveyor or Billing Engineer

Qualification: B.E./B.Tech in any engineering discipline.

Responsibilities: Preparing bills of quantities, bills and invoices, verifying quantities and costs, coordinating with contractors and managing payment certifications.

Candidates interested in estimation, billing and commercial roles can explore these quantity surveying courses covering quantity take-off, BOQ preparation, rate analysis, estimation and project planning.

QA/QC Engineer

Qualification: B.E./B.Tech in Civil or Mechanical Engineering.

Responsibilities: Developing project quality plans, conducting inspections, audits and testing, and ensuring that construction activities meet project quality requirements.

Clean Room Engineer

Qualification: B.E./B.Tech in Mechanical Engineering.

Responsibilities: Executing and managing clean-room packages involving HVAC, filtration, contamination control, validation and commissioning in accordance with applicable ISO requirements.

The official ISO 14644-4 clean-room standard addresses the process of creating a clean room from requirements through design, construction and start-up.

Contracts and Claim Management

Qualification: B.E./B.Tech in any engineering discipline.

Responsibilities: Managing contract administration, claims, variations and commercial coordination throughout the project lifecycle.

MIS, Document Controller or SAP Coordinator

Qualification: Any graduate or postgraduate degree.

Responsibilities: Managing MIS reports, document control, client submissions, SAP or ERP coordination and project documentation.

Material Controller, Stores or Procurement Coordinator

Qualification: Any graduate or postgraduate degree.

Responsibilities: Managing inventory, warehousing, logistics, procurement coordination, material planning, vendor interactions and stock control.

The qualifications and responsibilities above have been drawn from the PMC recruitment section on page one of the official walk-in notice.

Tata Consulting Engineers Power Business Openings

The Power Business recruitment is intended for candidates with 5 to 20 years of experience. The notice mentions B.E./B.Tech, M.E./M.Tech and relevant design engineering qualifications, along with Diploma qualifications in Electrical, Mechanical or Civil Engineering for designer positions.

Selected professionals may be based in Noida, Bangalore, Kolkata, Mumbai, Pune or Vadodara.

Thermal Power Plant Engineering Roles

Mechanical Engineering

Relevant experience may include:

• Plant layout engineering
• Piping layout and piping stress analysis
• Plant process and cyclic equipment
• Plant water systems
• Material handling systems
• Green hydrogen facilities
• HVAC systems

Electrical Engineering

Relevant areas include:

• Plant electrical system design
• Electrical layouts
• Switchyard engineering
• High-voltage, medium-voltage and low-voltage systems and equipment

Civil Engineering

Candidates should have experience in the analysis and design of steel and reinforced concrete structures for industrial plants and buildings.

Instrumentation and Control

The requirement covers instrumentation and control system design for thermal power and industrial facilities.

Transmission and Distribution Roles

Power System Studies – Electrical

Relevant technical experience includes:

• Insulation coordination studies
• HVDC studies involving LCC and VSC technologies
• Electromagnetic transient studies
• Protection and fault analysis
• Load-flow, short-circuit and stability studies
• Voltage ride-through and fault ride-through studies
• Power-quality and grid-compliance studies
• Industrial power-system studies for oil and gas, steel, chemical and green-hydrogen projects

Preferred software skills include:

• PSS/E
• PSCAD
• DIgSILENT PowerFactory
• ETAP
• Python scripting and automation

Substation and Transmission Engineering

Electrical professionals should have experience in:

• AIS and GIS substation design
• HVDC systems
• Transmission-line and substation design
• Battery Energy Storage Systems
• STATCOM systems

Civil professionals should have experience in:

• AIS, GIS and HVDC structures and foundations
• Transmission-line towers and foundations

Renewable Energy Roles

Renewable and Electrical Engineering

Relevant experience includes:

• Solar photovoltaic system design
• Onshore wind projects
• Battery Energy Storage Systems
• Energy-yield assessment
• Performance engineering
• HV and MV electrical-system design
• Plant commissioning and operations

Civil and Structural Engineering

Relevant experience includes:

• Civil and structural design
• Wind-turbine foundation design
• Floating structures
• Anchoring and mooring design

Hydro Power Roles

Civil and Structural Engineer

The requirement covers experience in:

• Concrete and rock-filled dams
• Tunnels and intake structures
• Canals and underground structures
• Geotechnical engineering and rock mechanics
• Powerhouses
• Engineering geology

Hands-on experience with MIDAS FEA-NX and Rocscience software is preferred.

Hydraulics Studies or Hydraulic Design Engineer

Relevant experience includes:

• Dams and barrages
• Surge shafts
• Penstocks
• Intake structures
• Marine structures
• Hydraulic and marine studies

Experience with MIKE software is preferred. These Power Business requirements appear on page two of the recruitment notice.

How to Attend the TCE Walk-In Interview

Eligible candidates can attend the interview directly at the Noida venue during the announced dates and time.

Walk-in venue:
Green Boulevard
Ground Floor, Towers B and C
Plot No. 89A, Sector 62
Noida – 201301, Uttar Pradesh

Dates: 1 and 2 August 2026
Time: 9:00 AM to 4:00 PM

The advertisement does not provide a separate registration form, email address or application portal. Candidates should check the official Tata Consulting Engineers careers page before travelling in case the company publishes a venue, schedule or eligibility update.

Job Advertisement Link: Click Here (Linkedin Post, Dt. 28th july 2026)

Documents Candidates Should Carry

The official recruitment notice does not specify a document checklist. As a practical walk-in interview preparation measure, candidates should consider carrying:

• Multiple printed copies of an updated resume
• Government-issued photo identification
• Educational certificates and mark sheets
• Experience and relieving letters
• Current employment and notice-period details
• Recent salary slips
• Professional certifications
• A project list or technical portfolio
• Copies of NEBOSH, PDIS, ADIS or software certificates, where applicable

ConstructionPlacements’ walk-in interview guidance recommends carrying a resume, references and a portfolio where relevant, dressing professionally and arriving early.

Candidates can also use ConstructionCareerHub.com to prepare an ATS-ready resume, assess career skills, practise interviews, calculate salary expectations and plan the next construction career move.

Recommended Courses for Applicants

Applicants can strengthen their preparation with fewer, role-specific courses rather than collecting unrelated certificates:

1. Construction Project Management – Columbia University on Coursera: covers project initiation, planning and construction-management fundamentals.
2. Construction Management Professional Certificate on edX: focuses on managing and delivering modern construction projects.
3. Primavera P6 for Civil Engineers – Masterclass in Planning on Udemy: covers planning, scheduling and monitoring through practical construction projects.

Oracle’s official Primavera P6 information and documentation can also help planning professionals understand enterprise project planning, scheduling and portfolio-management capabilities.

Recommended Interview and Career eBooks

Relevant preparation resources from Digitslick include the Construction Career Launchpad, the Civil Engineering Job Interview Guide with 300 Questions and Answers, and the Construction Career Mastery eBook Collection, which includes guides for planning engineers, construction managers, project coordinators, BIM professionals and civil engineers.

Frequently Asked Questions

When is the Tata Consulting Engineers Noida walk-in drive?

The walk-in drive will be conducted on 1 and 2 August 2026, from 9:00 AM to 4:00 PM.

Where will the TCE walk-in interview be conducted?

The interview venue is Green Boulevard, Ground Floor, Towers B and C, Plot No. 89A, Sector 62, Noida – 201301.

What experience is required?

PMC Business roles require approximately 2 to 25 years of experience, while Power Business design roles require 5 to 20 years of experience.

Can freshers attend the TCE walk-in drive?

The advertised experience ranges begin at two years for PMC positions and five years for Power Business roles. The notice does not list dedicated fresher vacancies.

Are all jobs based in Noida?

The interview will take place in Noida. The Power Business advertisement lists work locations in Noida, Bangalore, Kolkata, Mumbai, Pune and Vadodara. The PMC section does not specify final work locations.

Is online registration required?

No online registration requirement or application link is mentioned in the attached recruitment notice. Candidates should verify any last-minute instructions through the official TCE careers page.

What are the main job roles?

The drive includes Construction Manager, Planning Manager or Engineer, QA/QC Manager, MEP Engineer, Safety Manager or Engineer, Construction Engineer, Quantity Surveyor, Billing Engineer, Clean Room Engineer, Contracts and Claims, Document Control, Procurement, Thermal Power, Transmission, Renewable Energy, Hydro Power and Design Engineering roles.

Important Notice

Candidates should independently verify the interview schedule, eligibility and venue before travelling. ConstructionPlacements.com is an employment-information platform and is not the recruiting organisation. Applicants should not pay money to any individual claiming to guarantee employment.

For more current opportunities, check the regularly updated walk-in interview alerts for construction and engineering jobs.