Text Books & Reference Books on Structural Design of Bridges

Last Updated on January 11, 2022 by Admin

Following are the best textbooks and reference books on the Structural Design of Bridges. Consider these books for your further studies in civil engineering and structural engineering. The following books are recommended for a more detailed account of the structural design of bridges.


A bridge is a structure to connect over an obstacle. There are many different types, including a beam bridge, a cantilever bridge, a suspension bridge, and a trestle. Structural integrity is vital when designing bridges that withstand wind gusts, heavy traffic, and other forces that could cause damage. When creating a bridge, an engineer’s primary goal is to read the landscape to understand natural details in constructing the area.

Structural Design of BridgesThe majority (over 75%) of bridges today is steel beam bridges. Beams can be placed on stone or concrete abutments, on the bedrock with drilled shafts, or pile caps. They can be built by riveting together sections, welding segments, bolting fascia pads to I beams, and boltons to cantilever beams. Sometimes we use a combination of two or more construction principles. When designing a bridge using steel beams, we need to know how many and what size is required to calculate the amount and type of material needed for the bridge and its supports.

Reference Books on Structural Design of Bridges

1) Essentials of Bridge Engineering D. Johnson Victor, Oxford, and IBH Publishing Co. Pvt. Ltd.


2) Concrete Bridge Practice Analysis, Design, and Economics, V.K.Raina, Tata Mc Graw Hills Publications.

3) Design of Bridge Structures T.R.Jagdish and M.A.Jayram, Prentice Hall of India.

4) Design of Steel Structures Vol II Ramchandra, Standard Book House, Delhi. Codes

5) Indian Road Congress Standard Specifications and Code of Practices for Road Bridges.

6) IRC 18 1985, Design Criteria for Prestressed concrete road bridges (Post Tensioned Concrete)

7) IS:1915-1961, Code of Practice for Steel Bridges


There are three types of bridges: suspension, beam, and arch. A suspension bridge hangs from anchorages that are underground or above the ground. The chief problem with this type is that there is often not enough room to install the anchors for proper support. A beam bridge uses beams below the roadway to support its load weight. These types are rather sturdy but may cause poor aesthetics when standing next to a building or other structure. Finally, an arch bridge relies on semicircular arches made of reinforced concrete or other materials to stay standing. It is common to utilize corrugated steel to build these bridges to save on cost.

Bridges are structures that span rivers and other landforms with enough clearance to allow passage underneath. They offer a view of natural features such as water, mountains, valleys, and coastal vistas, which is highly desirable. There are various solutions for structural design, including horizontal truss bridges, suspension bridges, and steel-truss arch bridges.

This blog post is a beginning look at the structural design of bridges. However, keep in mind that other fields require more understanding than the basics put forth here; for this reason, reading books about bridge design may be suggested before diving into more complicated territory. To anyone with a curious mind and a desire for knowledge, we encourage you to continue learning to develop your skills.

Related Posts:

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More